AUDIOPHILE GRADE XLR CONNECTING CABLE
For most of the high-end audiophile systems, we prefer to use the XLR instead of the RCA, because the XLR provides 4V while the RCA provides 2V to transfer the audio signal. T-Ader engineers considers that it is the lower drive level series, We need to protect the signal flow without any interference effects.
T-Adler uses the oxygen-free high thermal conductivity copper ( OFHC ) which
is the highest conductivity material for signal path. Our conductor is the C10100 type with 99.99% pure copper with
0.0005% oxygen content.
T-Adler takes out all the impurity and add the silver Ag into the chemical specification.
T-Adler uses 64 x 0.1mm copper strands
It is a very high conductivity and high RF rejection cable.
We are using totally 7 conductors, 4 as the positive and 3 as the negative with one ground connection.
T-Adler specially developed the new Solomon gold plated XLR terminal
All the conductors are twisted into one direction to balance all the RF-rejection.
It is a very flexible cable.
T-Adler XLR cables are used in audio systems with XLR connections. The major is used in the true balanced connections between the sources, D/A, pre-amplifiers and the power amplifiers.
2 meter length
Weight : D Kg
Diameter : mm
Conductor resistance : Less than 39 ohm per one kilometer max.
Shielding resistance : less than 28 ohm
Conductor Capacitance : Less than 50 nF per one kilometer
Capacitor shield : less than 101 nF per one kilometer
Power rating : low voltage
Temperature : -30 to + 70C
Color of the cable : black
Color of the metal holder : Green
Limited number : Yes